Showing 1–16 of 50 results
P/N 11DB06 TYP 1066
Analog: moving coil movement, dual
Pointer deflection: 140 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 2″ round per MS33639 , L= 85 mm.
Case: metal, environmental sealing
Connector: five studs
Weight: <0.3Kg
Input signal:voltage, Shunt 60mVDC @100 A(ammeter)
Installed on PILATUS BRITTEN NORMAN BN2B
P/N 08DB21 TYP 1074
Analog: moving coil movement
Pointer deflection: 220 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 2″ round per MS33639 , L= 100 mm.
Case: metal, environmental sealing
Connector: six studs
Weight: <0.3Kg
Input signal: bulb resistance (RTD)
Power supply: 28 VDC-2W
Installed on PILATUS BRITTEN NORMAN
P/N 05DB11A TYP 1772
Analog: moving coil movement, triple
Pointer deflection: 120 and 90 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 5VDC-2.5W
Size: (width)146, (height)38, (depth)80 mm.
Case: metal, environmental sealing
Connector: MS3440H14C-19P
Weight: <0.55Kg
Input signal: 1 Kohm potentiometer transducer. 6,2VDC output to feed the transducers
Power Supply: 28 VDC- 3W(total). External zero and full scale adjustements available.
Installed on PIAGGIO P180
P/N 05DB45 TYP 1719
Analog: dual moving coil movement and dual tape servo movement
Pointer deflection: 120/140 degrees
Tape displacement: Normal sect. 72mm, Emergency sect. 80mm
Accuracy: ±2% f.s. moving coil and ±1% tape
Lighting: NVIS green A per MIL-L-85762A, 5V-5W
Size: (width)146 (height)95 (depth)120mm
Case: metal environmental sealing
Connector: MS3449H-16C-26P
Weight: < 1.1 Kg
Input signal: 1/10 KOhm potentiometer transducer/voltage. Output voltage to feed the transducer
Power supply: 28 V, 14W
Installed on ALENIA C27J
P/N 08DB19 TYP 1610
Analog: moving coil movement, dual
Pointer deflection: 140 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 2″ round per MS33639 , L= 100 mm.
Case: metal, environmental sealing
Connector: VT02E12-10PW-A.CH, (MS3112E-12-10PW)
Weight: <0.3Kg
Input signal: EGT- thermocouple chromel/alumel Cyl-bulb resistance (RTD)
Power supply: 28 VDC- 4W (total)
Installed on PILATUS BRITTEN NORMAN
P/N 05DB44 TYP 1718
Analog: moving coil movement
Pointer deflection: 70 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: NVIS green A per MIL-L-85762A, 5V – 2.5 W
Size: width 61, height 76.2, depth 102
Case: metal, environmental sealing
Connector: MS3449H-14C-19P
Weight: <0.5Kg
Input signal: Potentiometer; 5 VDC output to feed the position transducers. Two advisory lighted green legend controlled by external signal
Installed on ALENIA C27J
P/N 05DB48 TYP 1802
Analog: moving coil movement
Pointer deflection: 90 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: NVIS green A per MIL-L-85762A 5V-2W(white per MIL-L-27160,is available)
Size: 1″ round per MS33639, L= 90mm
Case: metal, hermetic/environmental sealing
Connector: MS3113H10-6PW
Weight: <0.1Kg
Input signal: 1Kohm potentiometer transducer. Output voltage to feed the transducer
Power supply: 28 V, 1W
Installed on AERMACCHI MB339
P/N 05DB30A TYP 1773
Analog: moving coil movement, quadruple
Pointer deflection: 90 and 25 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 5VDC-2.5W
Size: 2-3/8 square per STANAG 3319, L= 130 mm.
Case: metal, environmental sealing
Connector: MS3449H14C-19P
Weight: <0.36Kg
Input signal: voltage, 0 to 10VDC
Installed on PIAGGIO P180
P/N 06DB07 TYP 1185
Analog: moving coil movement, triple
Pointer deflection: 90 (60) degrees
Accuracy: ±3% f.s.
Friction and position error: <3% f.s.
Lighting: white per MIL-L-27160, 5VDC-2.5W
Size: 2-3/8 square per STANAG 3319, L= 130 mm.
Case: metal, environmental sealing
Connector: MS3449H14-19P
Weight: <0.5Kg
Input signal: Potentiometer for Slat and Flap indication. Voltage for Trim indication. 10VDC output to feed Slat and Flap transducers
Power supply: 28 VDC-0.1A(total).Three lighted legends, controlled by external signals
Installed on AMX
P/N 19XG04 TYP 1431
Accuracy: ±1%
Linearity: better than 1% f.s
Input signal: mass fuel flow transmitter
Accuracy: better than ±1%
Size: width110, height 44, depth 160mm.
Weight: 0.75 Kg
Output voltage: 0 to 5Vdc
Power Supply: 115Vac -400 Hz
Installed on ALENIA AERMACCHI AMX
P/N 16DM05 TYP 1876
Analog: moving coil movement
Digital: 4 digit, dot matrix, led type
Pointer deflection: 210 degrees
Accuracy: analog ±2% f.s;digital ±0.3%f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 5VDC-1.5W
Size: 2″ round per MS33639 , L= 151 mm.
Case: metal, environmental sealing
Connector: MS 3112E-14-12P
Weight: <0.55Kg
Input signal:fuel flow volumetric type, magnetic pick-up fuel temperature: resistive bulb (RTD)
Output signal:voltage from 0 to 5Vdc proportional to fuel flow
Power Supply:28 VDC-6W
Installed on PIAGGIO P180
P/N 16DM8A1908
Analog: servo movement
Digital: 4 digit, 7 segment filament type
Pointer deflection: 220 degrees
Accuracy: analog ±0.5% f.s from 200 to 1000ppH, elsewhere 0,8%.digital ± 0.4% f.s.
Lighting: white per MIL-L-27160; 5VDC, 1.5W max
Size: 2″ round per MS33639, L=170 mm.
Case: metal, environmental sealing
Connector: MS3112E14-19P
Weight: Input signal:mass transmitter, impeller and drum signals
Output signal: rate pulse, fuel used pulse and dc rate voltage (0 to 5Vdc).Digital display normally shows the fuel used value.Pulling the frontal knob resets of fuel used value.Pushing the frontal knob the digital display shows the fuel flow rate
Power Supply: 28 VDC,6W max
Installed on CATIC K8
P/N 19XG22A1888
Fuel gauge section:
Accuracy: ±1% Range: from 0 to 1600 LBS
InputSignal: capacitive fuel/compensator transmitters.The unit supplies the fueltransmitters
Output Signal: 100 to 1400Hz proportional to fuel q.ty. Fuel low level warning signal
Fuel flow section:
Accuracy: ±0.4%
Range: from 0 to 800 ppH
Input Signal(2): fuel flow volumetric type, magnetic pick-up
Fuel temperature: resistive bulb (RTD)
Output Signal: voltage 0.5 to 9.5 Vdc, proportional to fuel flow
Size: width 125, height 44, depth 190 mm.
Weight: 0.9 Kg
Power supply: 28VDC-8W (total)
Installed on PIAGGIO P180
P/N 06DB12 TYP 1067
Analog: moving coil movement
Pointer deflection: 220 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 1.5″ round per MS33639 , L=85 mm.
Case: metal, environmental sealing
Connector: five studs
Weight: <0.2Kg
Input signal: voltage, from 0.25 to 12.45VDC
Installed on PILATUS BRITTEN NORMAN BN2B
P/N 06DB13 TYP 1071
Analog: moving coil movement
Pointer deflection: 220 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 2″ round per MS33639 , L=100 mm.
Case: metal, environmental sealing
Connector: six studs
Weight: <0.3Kg
Input signal: voltage, from 0.25 to 4.25VDC
Installed on PILATUS BRITTEN NORMAN BN2B
P/N 04DB23 TYP 1090
Analog: moving coil movement
Pointer deflection: 220 degrees
Accuracy: ±2% f.s.
Friction and position error: <2% f.s.
Lighting: white per MIL-L-27160, 28VDC-2.5W
Size: 1.5″ round per MS33639 , L= 85 mm
Case: metal, environmental sealing
Connector: five studs
Weight: <0.2Kg
Input signal: variable resistance
Power supply: 28 VDC- 2W
Installed on PILATUS BRITTEN NORMAN BN2B